Acrylic Resins
-
Polyester acrylate: H220
H220 0 is a two-functional polyester acrylate oligomer; it has the characteristics of good adhesion, good leveling, high flexibility, ultra-low viscosity, good dilution, and high cost performance. It is mainly used in wood UV, paper UV, and plastic overprint UV. It can also partially replace TPGDA.
-
Acrylate: MP5163
MP5163 is a urethane acrylate oligomer.It has the characteristics of fast curing speed,high hardness, low viscosity, good substrate wetting, abrasion resistance, scratch resistance and matte powder arrangement.It is suitable for roll matt varnish, wood coating,screen ink application and other fields.
-
Polyurethane acrylate: HP6612P
HP6612P is a urethane acrylate oligomer with the characteristics of high hardness, good steel wool resistance,good water resistance,good toughness and high cost performance.
It is especially suitable for all kinds of coatings, such as plastic coatings,wood coatings, inks,electroplating coatings, etc.
-
Good interlayer adhesion good toughness polyester acrylate: CR90470-1
CR90470-1 is a polyester acrylic ester oligomer, which shows excellent adhesion to metal, plastic and other substrates and is suitable for solving the adhesion problems of various difficult substrates.
-
Polyurethane acrylate oligomer:YH7218
YH7218 is a Polyester Acrylic Resin with the good wettability, good flexibility, good adhesion, curing speed and so on. It is especially suitable for offset printing ink, screen printing ink and all kinds of varnish
-
Acrylate: HU280
HU280 is a special modified acrylate oligomer;It has highly reactive, high hardness,good wear-resistant,good yellow resistance;it is especially suitable for plastic coatings, floor coatings , inks and other fields.
-
Polyester acrylate: H210
H210 is a two-functional modified polyester acrylate; it can be used as an effective curing component in a radiation curing system. It has high solid content, low viscosity, good fluidity, good leveling and fullness, good adhesion and toughness. It is used in wood coating, OPV and plastic coating.
-
Good flexibility excellent yellow resistance polyester acrylate: MH5203
MH5203 is a polyester acrylate oligomer, it has excellent adhesion, low shrinkage,good flexibility and excellent yellow resistance. It is suitable used on wood coating, plastic coating and OPV, especially on adhesion application.
-
Polyurethane acrylate oligomer:MH5203C
MH5203C is a di-functional polyester acrylate resin; it has excellent adhesion, good flexibility, and good pigment wettability. It is recommended for wood coatings, plastic coatings
and other fields.
-
Polyester acrylate: HT7600
HT7600 is a polyester acrylate oligomer which developed for UV/EB-cured coatings and inks. It has fast curing speed , surface-dry easily, low distinct viscosity, good gloss retention, good adhesion, compared to similar products on the market, and it is high hardness, good abrasion resistance, smell small and low distinct viscosity.It is suitable used on plastic coating , wood coating ,OPV ,metal coating and so on.
-
Polyester acrylate: HT7379
HT7379 is a trifunctional polyester acrylate oligomer; it has excellent adhesion, good flexibility, good pigment wettability, good ink fluidity, good printing suitability and fast curing speed. It is applied to difficult-to-attach substrates, recommended for inks, adhesives and coatings.
-
Good ink-water balance cost-effective polyester acrylate: HT7370
HT7370 is a polyester acrylate oligomer; it has the characteristics of fast curing speed,
good adhesion, good wetting and fluidity to various pigments, and good printability. It is suitable for using in offset inks, UV screen inks and UV additive coatings.
